124 products, across four house brands.

Cleaners for tacky and baked-on flux residue around solder stations, strings and reflow equipment, cutting downtime at cleaning stops.

• Removes tacky residue from parts and tooling
• Pro grade clears carbonised deposits

Screen printing and marking ink solvents from fast flash-off for automatic washers to slow grades that stay wet through manual cleaning.

• Dissolves wet and partly dried printing ink
• Grades for manual cleaning and automatic screen washers

Cleaners for boards and populated assemblies after soldering, removing flux residue and ionic contamination from under low standoff components. Water-based, solvent and alcohol grades.

• Removes flux residue and ionic contamination
• Safe on laminate, solder mask and legend ink

Precision cleaners for display panels, touch screens, UV curing optics and lenses, where residue or haze would affect performance.

• No streaking or haze on coated display surfaces
• Restores light transmission through fouled UV optics

Cleaners that clear solder paste from SMT stencil apertures and misprinted boards, by wipe, spray or automatic stencil washer.

• Clears paste from fine apertures
• No residue left to affect the next print

High purity diluent that brings silver metallisation paste back into the printing viscosity window during solar cell screen printing.

• Restores paste viscosity to the printing window
• Compatible with common silver paste systems

Acetic acid including glacial grade, used in etch mixtures, buffering, textile and food-adjacent processing and general formulation.

• Glacial and diluted grades supplied
• Electronic grade for etch and buffer chemistry

Ammonium hydroxide solution for wafer cleaning chemistry, pH adjustment and formulation, in electronic and technical grades.

• Used in standard wafer clean sequences
• Low trace metal content on the electronic grade

Electronic grade hydrochloric acid for wafer cleaning, metal ion removal and RCA-type clean sequences in solar cell and semiconductor lines.

• Low trace metal and particulate content
• Consistent assay batch to batch

Electronic grade hydrofluoric acid for silicon wafer texturing, oxide etching and post-etch cleaning, with trace metal content held to semiconductor and solar cell limits.

• Trace metal content controlled to electronic grade limits
• Supplied in IBC, isotank and forward-stocked bulk

Electronic grade hydrogen peroxide for cleaning and oxidation steps in wafer and cell processing, stabilised so strength holds through bulk storage and day-tank transfer.

• Stabilised for bulk storage without rapid strength loss
• Low metal content suited to cleaning chemistries

Electronic grade potassium hydroxide solution for alkaline texturing, saw damage removal and cleaning of silicon wafers in solar cell manufacture.

• Controlled purity for texturing uniformity
• Delivered at line strength, no dilution needed

Nitric acid supplied in technical and electronic grades for metal pickling and passivation, wafer cleaning and chemical processing.

• Technical and electronic grades from the same supply chain
• Trace metal content controlled on the electronic grade

Phosphoric acid for metal pretreatment, phosphating chemistry, etching and formulation, supplied as liquid and as a powder form.

• Liquid and powder forms from one supplier
• Feeds our own phosphating and pretreatment range

Sodium hydroxide in flake and solution form for cleaning, etching, effluent neutralisation and general chemical processing.

• Flake and ready-made solution at your working strength
• Electronic grade available for wafer and cell processing

Sulphuric acid for pickling, anodising, battery and process use, with an electronic grade for wafer cleaning and etch chemistry.

• Technical and electronic grades available
• Consistent assay batch to batch

Board protection pair covering a conformal coating against moisture and condensation, and a contact cleaner for switches, relays and connectors.

• Protects boards against moisture and condensation
• Clears oxide causing intermittent connection

Flux for solar cell tabbing and stringing, developed to work across current cell types on the automatic stringers running in Indian module plants.

• Works across current cell and ribbon types
• Sprays cleanly without clogging stringer nozzles

Alkaline degreasing for steel and aluminium, by dip, spray or manual application, including a non-flammable grade and dry powder grades that cut freight cost.

• Removes heavy oil, grease and cutting fluid in one stage
• Powder grades ship without water, so far lower freight

Biodegradable bench and sink parts washing fluids that replace kerosene and diesel, plus a cleaner for machine beds, slideways and coolant tanks.

• Replaces kerosene and diesel in parts washers
• Low odour and non-flammable, unlike kerosene and diesel

Solvent degreasing for machined and precision parts. The neat grade introduces no water at all, and a water-miscible grade is available where the part is rinsed off afterwards.

• Neat grade introduces no water, so no flash rusting on machined parts
• Water-miscible grade gives solvent strength with water rinsing

Inhibitors dosed into wash water, coolant, hydro test water, oils and solvent systems to stop flash rusting between operations.

• Stops flash rust between wash and next operation
• Grades for aqueous, oil and solvent carriers

Semi-permanent coloured coatings for metal components and castings, giving a bright identification colour together with long-term corrosion and scratch protection. The film stays on through storage, handling and transport, and is taken off with a coating stripper when it is no longer wanted.

• Bright colour identifies the component, batch or customer at a glance
• Protects against corrosion and against scratch damage in handling and stacking

Oil-based preventives for machined and finished steel in storage and transit, including dewatering grades that displace water straight after aqueous washing.

• Dewatering grades remove the need for a drying stage
• Dry film grade lets parts be stacked and packed

Vapour corrosion inhibitor system that protects every surface inside a pack or enclosure, including faces the wrap never touches.

• Protects surfaces the wrap does not physically touch
• No oil or coating to remove before assembly

Cutting and heat treatment fluids covering water-miscible and neat machining oils and a quenching oil with controlled cooling rate.

• Stable emulsion that resists splitting in hard water
• Neat grade for heavy cut, broaching and gear cutting

Release and protection coatings for surfaces that things should not bond to, covering concrete on shuttering and plant, and weld spatter on nozzles and fixtures.

• Cement and spatter release instead of bonding
• Cuts chipping, dressing and clean-down time

Coatings that hold colour and adhesion on hot surfaces from around 400 to 600 degrees C, for exhausts, silencers, ducts, furnace parts and stacks.

• Grades rated to the service temperature of the part
• Resists flaking and discolouration under heat cycling

Peelable masking compound for areas that must stay uncoated through plating, painting or coating, in two colours for two-stage masking.

• Masks threads, bores and sealing faces accurately
• Peels off in one piece with no adhesive residue

Temporary peelable lacquers that shield finished surfaces through handling and transport, plus clear lacquers that seal bright and plated metal against tarnish.

• Peels off in one piece with no residue
• Water-based grade cuts solvent emission in the booth

Desmutting solution that removes the grey alloying smut left on aluminium after etching, giving a uniform bright surface before finishing.

• Clears the grey smut left by alkaline etching
• Even finish before anodising or coating

Paired remover and protective coating for copper busbars, tubing, fittings and decorative work, cleaning the metal bright and keeping it that way.

• Restores bright copper in a single dip or wipe
• Clear coating holds the finish through storage

Inhibited acidic descalers for boilers, heat exchangers, condensers, cooling circuits and hard water deposits on fittings and sanitary ware.

• Circulated in place, so no dismantling required
• Inhibited to limit attack on the equipment metal

Strippers for cured paint, primer, lacquer and powder coating, by brush or hot immersion, used on rework, refurbishment and coating line jigs.

• Strips cured coatings without abrasive blasting
• Hot alkaline grade clears jigs, hooks and racks in bulk

Converts existing rust into a stable overcoatable film for structures and fabrications that cannot be blasted or dismantled, with activators for even reaction.

• Treats rust in place, no blasting or dismantling
• Cures to a tough film that accepts paint directly

Acid and organic-acid rust removers for dip and brush use, from light surface rust on thin sheet to deep pitting and heavy mill scale.

• Dissolves rust chemically, no blasting or wire brushing
• Reaches threads, corners and blind holes

Remover for oxide tarnish, heat tint and handling discolouration on copper, brass and other non-ferrous metals.

• Restores brightness to copper and brass
• Removes heat tint from fabrication and soldering

Single bath that degreases, derusts and phosphates in one operation, replacing three tanks and their rinses and cutting floor space, water use and cycle time.

• Replaces three process tanks with one
• Leaves a phosphate layer ready for painting

Conversion coating chemistry for dip and spray lines, covering zinc, manganese and iron phosphating with bath accelerator, plus room-temperature blackening.

• Crystalline coatings that anchor paint and hold oil
• Manganese grade beds in gears and fasteners during run-in

Gels and liquids that remove weld heat tint and oxide scale from stainless fabrications and restore the passive layer, by brush or immersion.

• Gel clings to vertical seams and overhead welds
• Liquid gives uniform results across a full dip basket

Release agent for cement-based casting, including mineral cast machine beds and precast work, where surface finish on the casting matters.

• Clean release from cement and mineral cast moulds
• Preserves the cast surface finish

Oil-based release agents in graded viscosities, from a thin film that preserves fine detail through to a heavy film for deep draw and hot tooling.

• Viscosity grades matched to tool temperature and depth
• Fewer reapplications during a long production run

Wax release for composite layup and casting, plus a protective gel that keeps polished tool faces from rusting while the mould is idle.

• Durable wax film lasting several releases
• Gel stays put on vertical and overhead tool faces

Release agent formulated for polyurethane moulding, where PU bonds aggressively to bare tooling, including bonded and gasket parts applied by auto-spray.

• Stops polyurethane bonding to the tool face
• Clean release on foam, elastomer and rigid PU

Release agents for rubber moulding and vulcanising that hold their film through the full cure without staining or blooming the moulded part.

• Survives the complete vulcanising cycle
• No staining or bloom on the moulded rubber

Water-based release emulsions for rubber, plastic and composite moulding, diluted at the press or supplied ready to use for consistent shift-to-shift release.

• Low odour and non-flammable in the moulding area
• Light film that does not block printing or bonding

Removers that soften adhesive, label gum, tape residue and sealant so it wipes away, with a low-vapour water-based grade for occupied areas.

• Softens cured adhesive and tape residue fast
• Water-based grade for enclosed and occupied areas

Cleaners that leave an anti-static finish on floors, garments, curtains and partitions in ESD-sensitive assembly and cleanroom areas.

• Cleans and leaves an anti-static finish in one pass
• Reduces dust attraction and particle shedding

Heavy duty cleaning for concrete, epoxy, tile and natural stone, covering oil and tyre marks, grout discolouration, mould staining and embedded oil stains.

• Removes oil and tyre marks from workshop floors
• Poultice remover draws stains out of porous stone

Hand cleaning for workshop and field crews, removing oil, grease, carbon and ink without harsh solvent, including a waterless grade for site work.

• Removes oil and carbon without solvent
• Mild scrub agent that does not tear the skin

General plant housekeeping cleaners for floors, walls, machinery exteriors and work surfaces, including water-based and biodegradable options.

• One dilutable product covers most routine plant cleaning
• Water-based and biodegradable grades for effluent limits

Cleaners for specific plant assets, covering drums and tanks, HVAC coils and ducts, and rubber and engineering plastic components.

• Reaches between HVAC fins where brushing cannot
• Lets drums and IBCs be reused instead of scrapped

Lithium complex grease in NLGI 2 and 3 for bearings, pins, bushes and plant lubrication points, holding up under high temperature and extreme pressure.

• NLGI 2 for centralised systems, NLGI 3 where a stiffer grease is wanted
• Good water resistance and adhesion to metal

Penetrating oil and water-displacing spray for seized fasteners, hinges, linkages and electrical connections, the general-purpose can every workshop keeps.

• Frees seized threads and corroded fasteners
• Displaces moisture from exposed mechanisms

Dry silicone lubricant for rubber seals, window channels, conveyor surfaces and plastic-on-plastic contact where an oily film would attract dust.

• Non-staining film that does not attract dust
• Stops rubber seals squeaking and sticking

Sealers that stop concrete dusting and oil absorption, and give paver blocks a wet-look finish that resists staining and stabilises joint sand.

• Stops concrete dusting in traffic areas
• Resists oil and chemical absorption into the slab

Site and handover cleaning chemistry that dissolves cement splash, mortar smear, white salt bloom and hardened deposits from masonry, tile, glass and plant.

• Dissolves set cement without chipping or grinding
• Ready-to-use grade for site crews, no mixing

Thinner matched to acrylic paint systems, bringing them to spray viscosity while holding gloss, flow and levelling.

• Balanced evaporation for good flow and gloss
• Reduces orange peel and dry spray

Controlled solvent blends for degreasing, wipe down and equipment cleaning where a tuned blend is wanted rather than a single solvent.

• Fixed solvency and evaporation rate, batch to batch
• Grade selected against your soil and dry-off time

Chlorine-free, low-odour blended cleaning solvent for precision and workshop cleaning, developed for plants moving away from chlorinated solvents.

• Free of chlorinated solvent, noticeably lower odour
• High flash point, so lower fire risk in storage and use

Cleaning thinner for epoxy systems, flushing uncured epoxy from guns, lines, rollers and mixing equipment before it sets hard.

• Removes uncured epoxy before it hardens in equipment
• Slower grades for soaking and long cleaning cycles

Thinner for adjusting the viscosity of epoxy coatings for spray application, without upsetting cure, film build or gloss.

• Adjusts spray viscosity without affecting cure
• Keeps film build and gloss consistent

Slow evaporating blending thinner used to melt the edge of a spot repair into the surrounding paint so the join does not show.

• Blends repair edges into the existing paint
• Slow evaporation gives time to work the blend

General purpose industrial thinner supplied as a fixed blend, used for both thinning and equipment cleaning by customers standardised on it.

• Fixed blend with consistent solvency and evaporation
• Used for thinning and for equipment cleaning

Gun wash and equipment flushing thinner for refinish and industrial spray work, in a refinish grade and a bulk economy grade.

• Flushes guns and lines quickly between colours
• Economy grade for high volume bulk gun wash

Thinner blended for heat resistant coatings, holding them at spray viscosity without compromising high temperature performance.

• Does not affect high temperature performance
• Matched to aluminium and black heat resistant systems

Nitrocellulose thinner blended for low odour, for furniture, joinery and interior spray work where ventilation is limited.

• Noticeably lower odour than standard NC thinner
• Matched to nitrocellulose lacquer systems

Thinner for polyurethane coating systems, blended moisture free so the isocyanate component is not disturbed.

• Low moisture, so the isocyanate is not affected
• Holds PU gloss and film hardness

Acetone for cleaning, degreasing, resin and adhesive removal and formulation work, supplied to a consistent industrial purity.

• Very fast evaporation with no residue
• Strong solvency for resins, adhesives and coatings

Isopropyl alcohol in technical and high purity grades for electronics cleaning, optics, degreasing, disinfection bases and general formulation.

• Lab, electronic and industrial grades from one supply chain
• Fast evaporating with very low residue

Methylene chloride for paint stripping, adhesive removal and precision cleaning, including a stabilised grade for vapour and ultrasonic degreasing plant.

• Very high solvency for cured paint and adhesive
• Stabilised grade holds boiling point through repeated cycles

Toluene for thinning, cleaning and formulation across paint, adhesive, rubber and bitumen processing.

• Strong solvency for resins, rubber and bitumen
• Standard component in thinner and adhesive blends

Deionised water with dissolved ionic salts removed, for battery topping, coolant make-up, rinse stages and general laboratory use, with an inhibited version for closed circuits.

• Ionic salts removed, so no scale or deposit on drying
• Inhibited grade prevents flash rust after the final rinse

Demineralised water for process make-up, rinsing, humidification and battery use, supplied from bulk tanker down to small packs for instrument and field service work.

• Low mineral content, so no scale in equipment
• Small packs avoid waste and contamination in the lab

Distilled water produced by distillation rather than ion exchange, as many test methods specify, with a double distilled grade for analytical work.

• Produced by distillation as test methods specify
• Double distilled grade for analytical and instrument work

Powder that generates heat on contact with water, used in flameless heating packs for food, beverages, field rations and emergency use.

• Heats without flame, fuel or electricity
• Controlled reaction for a predictable heating time

Ultra pure water for analytical instruments, electronics rinsing and other work where even trace ionic content affects the result.

• Highest purity grade produced on site
• For analytical instruments and electronics rinsing

Inhibitor additives dosed into coolant or process water to restore corrosion protection as the fluid ages, extending life before a full change.

• Restores inhibitor level in coolant already in service
• Inhibitor balances for mixed and single metal systems

Flush that clears scale, rust and old inhibitor sludge from a cooling circuit before fresh coolant goes in, restoring heat transfer.

• Clears sludge and scale that block heat transfer
• Circulated in place, no dismantling required

Monoethylene glycol coolants with a full inhibitor package, supplied pre-diluted or as concentrate, including grades built to customer specification.

• Protects aluminium, cast iron, copper, brass and solder
• Concentrate makes four times its volume of coolant

Activator supplied alongside a main treatment chemistry to start or accelerate the intended reaction, dosed in small quantity relative to the main product.

• Starts and accelerates the intended reaction
• Matched to the product it is used with

Contract manufacture of autocare ranges for brands and OEMs, covering formulation, blending, filling, labelling and packing to your specification.

• Proven formulations available for white labelling
• Shampoo, foam, glass, tyre, interior and paint care

Development and manufacture of cleaning and corrosion protection chemistry built around your substrate, process, storage period and effluent limits.

• Formulated around your substrate and process
• Validated against your own test protocol before release

Nanomaterials and green chemistry developed through Para Nano Chem, available for joint development with industry partners.

• Nanomaterial coating and cleaning research
• Bio-based replacements for solvent heavy cleaners

Low volume, high specification formulations that larger plants will not take on, including high purity electronics chemistry and genuinely niche products.

• Purity controlled and certified to your specification
• Takes on volumes larger plants decline

High-pressure aerosol that flushes brake dust, oil and grease from calipers, drums and clutch assemblies without dismantling them.

• Cleans without dismantling the assembly
• Evaporates completely, leaving no film on friction surfaces

Engine bay degreasers from a water-rinsable workshop version to a solvent grade for baked-on oil on commercial vehicles and earthmovers.

• Grades for routine service through to heavy baked deposits
• Biodegradable option for bays with oil and water separators

Fast-evaporating aerosols that dissolve carbon, gum and fuel varnish from throttle bodies, carburettors, chokes and intake passages.

• Restores smooth idle and throttle response
• Evaporates fully, leaving nothing in the intake tract

Coating applied over cleaned battery terminals to stop the sulphate corrosion that causes hard starting and intermittent electrical faults.

• Seals terminals against acid vapour and corrosion
• Maintains clean electrical contact and charging

Two-step motorcycle chain care in aerosol, flushing out grit and old lubricant then laying down a film that penetrates the rollers and resists fling-off. Available as clean and lube combo kits.

• Safe on O-ring and X-ring chains
• Low fling, so no spatter on wheel and swingarm

Oil additive that reduces friction and wear between service intervals, aimed at petrol and hybrid engines running frequent stop-start cycles.

• Reduces friction and wear between oil changes
• Suited to stop-start and hybrid duty cycles

Fuel tank additives that clean injectors, intake valves and the combustion chamber, with the petrol grade formulated for E20 blended fuel.

• E20 compatible petrol formulation
• Restores injector spray pattern and fuel economy

API GL-4 80W-90 gear oil for two wheeler gearboxes and light transmissions, protecting gear faces without attacking yellow metals.

• GL-4 additive level, safe on brass and bronze
• Holds film strength at high gearbox temperature

Rubberised bitumen coating for vehicle underbodies and wheel arches that resists stone chip, damps road noise and seals the panel against moisture.

• Stone chip resistance on exposed underbody panels
• Damps road and drumming noise in the cabin

All-surface spray for two wheelers that cleans, shines and protects paint, plastic, chrome and engine casings and dries without wiping.

• One product for every surface on the bike
• Spray and leave, no wiping or buffing

Treatments for the car air conditioning system and cabin air, clearing the musty smell at the evaporator rather than masking it at the vent.

• Treats the evaporator where the odour actually forms
• Neutralises odour molecules instead of covering them

Concentrated car wash shampoo from an economy bucket wash through to high lubricity and biodegradable versions for detailing studios and wash bays.

• One chemistry, graded to match price point and wash method
• Neutral to mildly alkaline, so wax and sealant are not stripped

Ammonia-free glass cleaner for windscreens, mirrors, interior glass and building glass, supplied as a dilutable concentrate or ready to use.

• Dries clear with no streaking or haze
• Safe over tinted film and rubber beading

Treatment that clears the yellowed, hazed polycarbonate on older headlamps and restores light output without replacing the unit.

• Restores clarity and light output on hazed lamps
• Avoids the cost of a replacement headlamp unit

Helmet cleaning, anti-fog and interior disinfection for riders, dealerships and rental fleets, safe on polycarbonate visors and shell paint.

• Visor safe, no clouding or crazing
• Foam reaches interior padding where sweat and odour sit

Cabin care covering dashboard and trim dressing, fabric and carpet cleaning, and leather cleaning and conditioning.

• Non-greasy satin finishes with no windscreen glare
• UV absorbers slow dashboard fading and cracking

Removers for the bonded contamination that washing leaves behind, including insect residue, road tar, embedded iron particles and hard water etching.

• Dissolves bonded contamination instead of abrading it off
• Colour-change iron remover shows exactly where fallout sits

Paint correction range covering single-step polishing, bright metal polishing and heavier cutting for swirl and scratch removal by machine or hand.

• Corrects and finishes in fewer passes
• Low dust and easy wipe-off for body shop use

Treatments that make water bead and clear off the windscreen at speed, improving wet weather visibility and reducing night glare.

• Water clears without wipers above moderate speeds
• Cuts oncoming headlight dazzle at night

Pre-wash foam for cannons and lances that softens and lifts dirt before any contact washing, cutting the swirl marks a direct mitt wash causes.

• Clinging foam blanket holds dirt in suspension
• Touch-free first stage reduces wash scratching

Sidewall dressings from economy sponge-on to premium high-solids and aerosol foam, restoring black colour and resisting early wash-off.

• Finish levels from satin to deep gloss
• Low sling, so no spatter on the bodywork

Wash systems for locations with no water supply or drainage, encapsulating dirt so it wipes away instead of scratching the paint.

• Cleans with a fraction of the water, or none at all
• Suits showrooms, basement parking and doorstep detailing

Paint protection from traditional carnauba and paste wax through to silica ceramic and graphene coatings, covering weeks of gloss to months of chemical resistance.

• Protection tiers from a few weeks to several months
• Strong water repellency keeps vehicles cleaner between washes

Cleaners that lift baked brake dust from alloys and strip old dressing and sidewall blooming from tyres before redressing.

• Lifts brake dust without hard scrubbing
• Strips old silicone so new dressing goes on evenly

Washer bottle concentrate that clears road film, insect residue and diesel soot at speed, blended non-freezing for Indian ambient conditions.

• Dilutes up to 1:50, so very low cost per fill
• Clears oily film without smearing across the screen

Concentrated dishwashing liquid that cuts cooking oil and food residue in hard and soft water, rinsing off without taste or film.

• Cuts cooking oil and masala residue quickly
• Rinses completely with no taste or film

Unit-dose tablet for domestic and light commercial dishwashers, combining detergent, rinse aid and salt function in a single tablet.

• One tablet per cycle, no measuring
• Combined detergent and rinse aid function

Combined floor cleaner and disinfectant for homes, offices, hospitals and canteens, cleaning and sanitising in a single mopping.

• Cleans and disinfects in one operation
• Works on tile, mosaic, stone and concrete

Hand hygiene pair for homes, offices and plant washrooms, supplied in retail packs and bulk refills.

• Cleans thoroughly while staying mild on skin
• Alcohol sanitiser for where washing is not practical

Floor and surface cleaner for tiles, mosaic, stone and painted surfaces in homes and offices, leaving a clean finish and lasting fragrance.

• One product for floors, walls and washable surfaces
• No dulling film on glazed tile

Commodity household chemicals supplied in retail and bulk packs alongside the branded range, for customers consolidating suppliers.

• Retail and bulk packs from the same plant
• Consistent quality and labelling across the basket

Alkaline degreaser for chimneys, hoods, ducts, stoves and tiles where cooking oil has baked into a hard layer, with a food-zone grade for commercial kitchens.

• Breaks down baked cooking oil and carbon
• Food zone grade for kitchens in service

Liquid laundry detergent for machine and hand washing that dissolves instantly, leaving no undissolved powder in the fabric.

• Works in cold water and front-loading machines
• No powder residue left in fabric

Water-soluble unit-dose laundry pod that removes measuring and spillage, aimed at the premium retail and subscription segment.

• One pod per load, no measuring or spillage
• Compact pack, lower shipping weight per wash

Repellent sprays that drive rodents and crawling insects away from vehicles, panels, ducting, kitchens and store rooms without traps or poison.

• Repels rather than kills, so no carcass to clear
• Residual film keeps working after drying

White petroleum jelly supplied in household and bulk packs, used as a skin protectant and as a general barrier and lubricant.

• Forms a barrier that holds moisture in the skin
• Odourless and free of added colour

Room freshener that neutralises cooking, smoke and damp odours rather than layering fragrance over them.

• Neutralises odour molecules, not just masking
• Spray and gel formats for different rooms

Sanitiser for high touch points such as door handles, counters, switches and washroom fittings in homes, offices and plants.

• Fast acting on high touch surfaces
• Dries without wiping and leaves no sticky film

Washroom pair covering a thickened acidic bowl cleaner and a surface cleaner for tiles, basins, taps and shower areas.

• Thick liquid clings under the rim
• Removes limescale, soap film and hard water marks